How to reprogram the remote unit

Reply
 
LinkBack Thread Tools Display Modes
Old 18 Sep 2008, 04:22 pm   #1 (permalink)
anthony365
Guest
  • Posts: n/a
  • User Status:


Default How to reprogram the remote unit

Can any one there teach me how to program the Toyota Camry remote
control ( rolling code type).And how to pair again if lost of connect
to Car unit.I mean use of ORI remote but cannot fuction with the car
and the remote unit sure in good condition.Normal if use of Cobra
remote is take out the battery put it back the led light always on
then press both button light go off then press one of the button to
pair it back. I need that step for
the cammry .If you know that please share with me please.


Thanks

--
Posted at author's request, using moderated http://www.AutoBoardz.com interface
Thread archive: http://www.AutoBoardz.com/reprogram-...ict248953.html
  Reply With Quote
Old 19 Sep 2008, 01:09 am   #2 (permalink)
mack
Guest
  • Posts: n/a
  • User Status:


Default Re: How to reprogram the remote unit


"anthony365" <none@000.com> wrote in message
news:1209920_5e8dc75af28f4888301bcbeb878dd9a2@auto boardz.com...
> Can any one there teach me how to program the Toyota Camry remote
> control ( rolling code type).And how to pair again if lost of connect
> to Car unit.I mean use of ORI remote but cannot fuction with the car
> and the remote unit sure in good condition.Normal if use of Cobra
> remote is take out the battery put it back the led light always on
> then press both button light go off then press one of the button to
> pair it back. I need that step for
> the cammry .If you know that please share with me please.
>
>
> Thanks
>
> --
> Posted at author's request, using moderated http://www.AutoBoardz.com
> interface
> Thread archive:
> http://www.AutoBoardz.com/reprogram-...ict248953.html


Try Googling it or look in you browser for the instructions. They're quite
complicated and require a lot of turning the ignition, opening the door,
doing a tarantela, murmuring an Om, etc. But the instructions are there
somewhere.


  Reply With Quote
Old 19 Sep 2008, 07:01 pm   #3 (permalink)
johngdole@hotmail.com
Guest
  • Posts: n/a
  • User Status:


Default Re: How to reprogram the remote unit

I think you should be able to get a fax-back instruction on how to
program the thing, even the complete instruction on how to install one
from Fujitsu-Ten fax back service. Google shows:

RS3200 Security Information Source - YotaTech Forums
May 27, 2005 ... In looking for sources, I ran across the fax back
service from the manufacturer, Fujitsu Ten. You can call them at
310-327-9905 and their ...
yotatech.com/f2/rs3200-security-information-source-15674/ - 61k -



On Sep 18, 2:22*pm, anthony365 <n...@000.com> wrote:
> Can any one there teach me how to program the Toyota Camry remote
> control ( rolling code type).And how to pair again if lost of connect
> to Car unit.I mean use of ORI remote but cannot fuction with the car
> and the remote unit sure in good condition.Normal if use of Cobra
> remote is take out the battery put it back the led light always on
> then press both button light go off then press one of the button to
> pair it back. I need that step for
> the cammry .If you know that please share with me please.
>
> Thanks

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 06:48 am.

Attribution:
Autoblog
Powered by Yahoo Answers



ToyotaLexusForum.com is an unofficial community for car enthusiasts. ToyotaLexusForum.com is not affiliated with Toyota Motor Corporation in any way.
Toyota Motor Corporation does not sponsor, support, or endorse ToyotaLexusForum.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.