Need help to code transponder key for Camry 2002

Reply
 
LinkBack Thread Tools Display Modes
Old 22 Aug 2005, 11:26 am   #1 (permalink)
potse@mail.com
Guest
  • Posts: n/a
  • User Status:


Default Need help to code transponder key for Camry 2002

Hi,

I have recently bought a 2002 Camry CSI but unfortunately it came with
only 1 master key. Bought a new key from Toyota and have the key cut
done. Next I would like to try coding the key with the elecronic module
in the car. Found a procedure in one of the old news thread as follows
but does not have any success after following the steps. Has anyone got
any clue?

"The programming sequence for adding another key (Toyota key part
number 89785-26020) to the Camry, according to the key company catalog
is as follows: Make sure all windows and doors are closed, and insert
the master key in the ignition. Cycle the
ignition key ON/OFF 5 times and leave the key in the lock. Open/Close
the driver side door 6 times. Remove the original key and insert the
new duplicate key, BUT DO NOT TURN THE KEY ON. The theft light will
stay off after 60 to 80 seconds indicating the re-programming was
successful."

Would also like someone to clarify some of the steps for me below.
When it says "insert new key, do not turn the key on", does it mean
leaving the key in "lock" or "AC" position? Does "cycling the ignition
key ON/OFF" mean moving the key position from "AC" to "ON" and then
back to "AC"? I have assumed the above in the try which failed. What
should I try next?

Many thanks in advance.

Kind regards,
Paul Tse.

  Reply With Quote
Old 22 Aug 2005, 05:48 pm   #2 (permalink)
Goat
Guest
  • Posts: n/a
  • User Status:


Default Re: Need help to code transponder key for Camry 2002

Is there anything at this site that can help you with the new key.

http://www.geocities.com/toyota_speed2003/
--
Goat

For Reply, Post to Group Only
<potse@mail.com> wrote in message
news:1124727999.617761.257440@z14g2000cwz.googlegr oups.com...
> Hi,
>
> I have recently bought a 2002 Camry CSI but unfortunately it came with
> only 1 master key. Bought a new key from Toyota and have the key cut
> done. Next I would like to try coding the key with the elecronic module
> in the car. Found a procedure in one of the old news thread as follows
> but does not have any success after following the steps. Has anyone got
> any clue?
>
> "The programming sequence for adding another key (Toyota key part
> number 89785-26020) to the Camry, according to the key company catalog
> is as follows: Make sure all windows and doors are closed, and insert
> the master key in the ignition. Cycle the
> ignition key ON/OFF 5 times and leave the key in the lock. Open/Close
> the driver side door 6 times. Remove the original key and insert the
> new duplicate key, BUT DO NOT TURN THE KEY ON. The theft light will
> stay off after 60 to 80 seconds indicating the re-programming was
> successful."
>
> Would also like someone to clarify some of the steps for me below.
> When it says "insert new key, do not turn the key on", does it mean
> leaving the key in "lock" or "AC" position? Does "cycling the ignition
> key ON/OFF" mean moving the key position from "AC" to "ON" and then
> back to "AC"? I have assumed the above in the try which failed. What
> should I try next?
>
> Many thanks in advance.
>
> Kind regards,
> Paul Tse.
>


  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 03:08 pm.

Attribution:
Autoblog
Powered by Yahoo Answers



ToyotaLexusForum.com is an unofficial community for car enthusiasts. ToyotaLexusForum.com is not affiliated with Toyota Motor Corporation in any way.
Toyota Motor Corporation does not sponsor, support, or endorse ToyotaLexusForum.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.