Where is FROST PLUG on 3 litre engine ?

Reply
 
LinkBack Thread Tools Display Modes
Old 08 Dec 2005, 05:32 pm   #1 (permalink)
Eunoia Eigensinn
Guest
  • Posts: n/a
  • User Status:


Default Where is FROST PLUG on 3 litre engine ?

The weather people are saying that this winter is going be colder than
usual so I thought I'd install a block heater.

I was going to put in the type that fits into the rad hose but the
"universal" one that I bought apparently won't work because of the hose
arrangement in the Camry (I just called the heater manufacturer) so it
looks like I have to go with the cheaper type that replaces the frost
plug.

It's pretty cold out there right now (and dark) and I didn't feel like
crawling around under the car to have a look so I'm asking here
instead. (Also, how easy is it to get at to remove ?) If it's such
that I require long arms and tiny hands, then I may just pawn off the
job on my neighbourhood mechanic.

Thanks in advance .

  Reply With Quote
Old 08 Dec 2005, 06:39 pm   #2 (permalink)
m Ransley
Guest
  • Posts: n/a
  • User Status:


Default Re: Where is FROST PLUG on 3 litre engine ?

You might be alot safer cutting in the hose, I would personaly not mess
with a freeze plug., get someone that knows, Look for a round recessed
disk apx 1" in diameter. Most everything is visible on the 4

  Reply With Quote
Old 09 Dec 2005, 04:34 pm   #3 (permalink)
davidj92
Guest
  • Posts: n/a
  • User Status:


Default Re: Where is FROST PLUG on 3 litre engine ?

Eunoia Eigensinn wrote:
> The weather people are saying that this winter is going be colder than
> usual so I thought I'd install a block heater.
>
> I was going to put in the type that fits into the rad hose but the
> "universal" one that I bought apparently won't work because of the
> hose arrangement in the Camry (I just called the heater manufacturer)
> so it looks like I have to go with the cheaper type that replaces the
> frost plug.
>
> It's pretty cold out there right now (and dark) and I didn't feel like
> crawling around under the car to have a look so I'm asking here
> instead. (Also, how easy is it to get at to remove ?) If it's such
> that I require long arms and tiny hands, then I may just pawn off the
> job on my neighbourhood mechanic.
>
> Thanks in advance .


I don't mean this to be smart, but if you don't know what a freeze-plug is
you probably shouldn't try to install yourself, especially if you need it in
a hurry. They need to be installed in a precise manner so the block isn't
damaged in the process and leak from it. The freeze-plug type is a good
option, many types of construction equipment (backhoes, loaders and etc.)
with diesel engines have this style and they work well. I've worked
(replaced and installed) on a lot of these.
I've personally used the tank style and they are a good choice. I opted for
hooking to the heater hose and lower rad hose when I installed them. It used
to be the dip-stick style was dangerous and started fires in some instances,
so some states outlawed them. They are probably better constructed now but,
would be my last choice.
HTH, davidj92


  Reply With Quote
Old 29 Dec 2005, 11:36 pm   #4 (permalink)
joanne_mh
Guest
  • Posts: n/a
  • User Status:


Default Re: Where is FROST PLUG on 3 litre engine ?

"" wrote:
> The weather people are saying that this winter is going be
> colder than
> usual so I thought I'd install a block heater.
>
> I was going to put in the type that fits into the rad hose but
> the
> "universal" one that I bought apparently won't work because of
> the hose
> arrangement in the Camry (I just called the heater
> manufacturer) so it
> looks like I have to go with the cheaper type that replaces
> the frost
> plug.
>
> It's pretty cold out there right now (and dark) and I didn't
> feel like
> crawling around under the car to have a look so I'm asking
> here
> instead. (Also, how easy is it to get at to remove ?) If
> it's such
> that I require long arms and tiny hands, then I may just pawn
> off the
> job on my neighbourhood mechanic.
>
> Thanks in advance .


My suggestion is you get a trained mechanic to do the job.
Once the frost plug is removed you will loose most of your
coolant, hence a messy job. The engine block heater is
easily damage on installation if not careful, and will cause
MAJOR coolant leak if it blows out....which needless to say
could cause engine damage if it over heats.

Joanne MH

--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/FROST-PLUG...ict149588.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=722198
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 05:25 am.

Attribution:
Autoblog
Powered by Yahoo Answers



ToyotaLexusForum.com is an unofficial community for car enthusiasts. ToyotaLexusForum.com is not affiliated with Toyota Motor Corporation in any way.
Toyota Motor Corporation does not sponsor, support, or endorse ToyotaLexusForum.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.