94 toyota audio system help!!

Reply
 
LinkBack Thread Tools Display Modes
Old 03 Sep 2006, 08:27 pm   #1 (permalink)
xuedong
Guest
  • Posts: n/a
  • User Status:


Default 94 toyota audio system help!!

2 weeks ago, i changed origanal toyota cassette player for a new cd
player.
i conected all the wires individually like this:
http://www.installdr.com/Harnesses/Toyota-Wiring.pdf

my cd player getting no power, and i messed my clock, the clock have no
power now.

  Reply With Quote
Old 04 Sep 2006, 09:20 am   #2 (permalink)
Daniel
Guest
  • Posts: n/a
  • User Status:


Default Re: 94 toyota audio system help!!

xuedong wrote:
> 2 weeks ago, i changed origanal toyota cassette player for a new cd
> player.
> i conected all the wires individually like this:
> http://www.installdr.com/Harnesses/Toyota-Wiring.pdf
>
> my cd player getting no power, and i messed my clock, the clock have no
> power now.

========================================
I purchased an Alpine CDE-9843 from Crutchfield, and all the new
connector wires matched the Toyota wire colors so the process was
simplified - for a 1994 Camry. The unit works great.
For the PDF file you posted, for 1987 and newer, looks to me like the
column headings are reversed.
The column on the right labeled "Typical New Radio Equivalent Wire
Color" is actually the guide to the existing Toyota wire colors. For
example "A" , the gray wire, for Toyota, is the Right Front Speaker
Positive. "B" for Toyota, is White - the Left Front Speaker Positive.
My diagram had slightly different wording for the power wires. Red is
12 volts Switched Power, Yellow is 12 volts constant power.
Also, Blue from Toyota is power antenna, and it should join H and I in
the new connector. On my new connector, there was already a wire loop
connecting those pins and a single blue wire coming out to connect to
the Blue Toyota power antenna wire.
J, marked "do not use" on your diagram is marked "Orange/ White -
Dimmer" on my diagram, and there was a connection for it on the new
wiring harness. As far as I can tell, this wire operates the
illumination for the new stereo unit. There's a note that says "If your
receiver does not have a dimmer or illumination wire, tape off the
Orange/White wire.
Black is called "chassis ground" essentially the same as yours.
My new radio also had the wire functions listed on a label/sticker on
the bottom of the new unit.
If your new unit has one of those stickers or labels I would go by
that, and use the functions listed in the Right column of your PDF file
as a guide. For example, the "Green" wire should be "Left Rear Speaker
Positive" _not_ "Right Front Speaker Positive" and "White" goes to Left
Front Speaker Positive, _not_ right rear speaker negative.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 03:13 am.

Attribution:
Autoblog
Powered by Yahoo Answers



ToyotaLexusForum.com is an unofficial community for car enthusiasts. ToyotaLexusForum.com is not affiliated with Toyota Motor Corporation in any way.
Toyota Motor Corporation does not sponsor, support, or endorse ToyotaLexusForum.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.