Corolla 1994 hub removal on the car

Reply
 
LinkBack Thread Tools Display Modes
Old 12 Nov 2012, 11:51 am   #1 (permalink)
Bill
Guest
  • Posts: n/a
  • User Status:


Default Corolla 1994 hub removal on the car

Hi folks
I am a DIY'er who learns as I do things. I am going to try and replace
the left side front axle, hub and bearing on a 1994 Corolla while the
steering knuckle is still on the car. I have found a bearing tool set that
will help me with the remove and replace of the bearing but I would like to
know how I can safely get the hub off. I saw someone use a bearing
separator as a backing plate but they just used the screw in lug bolts to
pull it off. My hub has studded lugs. I might be able to use a bearing
separator with some other tool to get the hub off after the axle is taken
out of it. Any suggestions would help. Links to pictures? Also whats a good
way to drive in the seals. Thanks for the help. Bill
  Reply With Quote
Old 12 Nov 2012, 10:00 pm   #2 (permalink)
Bill
Guest
  • Posts: n/a
  • User Status:


Default Re: Corolla 1994 hub removal on the car

Bill <me@nospam.nix> wrote in news:XnsA10982C50163Felp75@69.16.185.247:


Anybody have any ideas? Am I way off? I could use the help.
  Reply With Quote
Old 12 Nov 2012, 11:28 pm   #3 (permalink)
hachiroku
Guest
  • Posts: n/a
  • User Status:


Default Re: Corolla 1994 hub removal on the car

On Tue, 13 Nov 2012 04:00:40 +0000, Bill wrote:

> Bill <me@nospam.nix> wrote in news:XnsA10982C50163Felp75@69.16.185.247:
>
>
> Anybody have any ideas? Am I way off? I could use the help.


Unfortunatley, this has become a politcs group, for quite a while now. All
the people that had the knowledge have left. some of them are in
rec.autos.tech

If I knew, I'd help you. From my experience with hub bearings, however,
you usually need a press with about 300PSI to press the new one in.

Head over to r.a.t and post, and you should get a (useful) answer.

Good luck!

  Reply With Quote
Old 13 Nov 2012, 06:15 pm   #4 (permalink)
F Murtz
Guest
  • Posts: n/a
  • User Status:


Default Re: Corolla 1994 hub removal on the car

hachiroku wrote:
> On Tue, 13 Nov 2012 04:00:40 +0000, Bill wrote:
>
>> Bill<me@nospam.nix> wrote in news:XnsA10982C50163Felp75@69.16.185.247:
>>
>>
>> Anybody have any ideas? Am I way off? I could use the help.

>
> Unfortunatley, this has become a politcs group, for quite a while now. All
> the people that had the knowledge have left. some of them are in
> rec.autos.tech
>
> If I knew, I'd help you. From my experience with hub bearings, however,
> you usually need a press with about 300PSI to press the new one in.
>
> Head over to r.a.t and post, and you should get a (useful) answer.
>
> Good luck!
>

Now you have told the nongs somewhere else to invade.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 04:07 pm.

Attribution:
Autoblog
Powered by Yahoo Answers



ToyotaLexusForum.com is an unofficial community for car enthusiasts. ToyotaLexusForum.com is not affiliated with Toyota Motor Corporation in any way.
Toyota Motor Corporation does not sponsor, support, or endorse ToyotaLexusForum.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.