Best would be Krazy Glue, but make sure you aim it right because you have one shot at it. Removing it will be a pain, and messy. Align a piece of tape directly under where you want to apply it (as a guide). Just don;t put too much glue on it so as not to let it gush out the sides when you press down on it. But even if it does, it is clear anyways.
Don't try 2 way adhesive tape (as many people will recommend because it is the recommended method) because you will have to apply that to the back, then use a cutter or razoer blade to cut out the edges. Too messy, if you are not a professional.
Stick with the Krazy Glue!
|
What is the best adhesive to put a logo back on a vehicle? for example a toyota emblem that is
Linear Mode
