1,unscrew door open latch/handle
2, unscrew/unclip door cover etc (prise doorcover clips frm door gingerly and prior to removal check and unclip wires for speakers etc.
3,unseal transparant plastic sheet.
4,once all above cleared, then.......
5,unclip winder cable loom,door lock linkages etc, unscrew speakers etc
6,unscrew/loosen winder regulator and unclip small wire cable.etc.(don t snap nylon prts)
7, drop glass cradle slowly holding with hands. and bring/juggle thru biggest gap.
reverse procedure to assemble.
process may vary on manual wind, but simular.
ENJOY!!
|