I'm not sure if this method will work for your alarm (is it factory or aftermarket), but it has worked for me in the past with most factory alarms.
Disconnect your battery, turn the key into the on position, then reattach the battery. If it works the alarm should be deactivated and you should be able to start your car. However, if your system has a timer it will arm itself again as the alarm system is still going to be operational.
Most aftermarket systems have a switch to deactivate the system, you might want to look for one. Otherwise the best solution is to get a new remote or ask the place that installed the alarm (or the dealer) how to deactivate it.
Good Luck!
|