x2 pbleek, first best answer!
to add,
shop hour charges vary greatly. so you'll have to call around locally for an exact on that. usually 60-80 bucks an hour, +-. a lot of +-.
both the 4 and the 6 cyl offered in these years can be done under three hours. but five hours for a shop is not unreasonable.
your main concern would be the condition of the tensioners/springs and any oil leaks. the oil pump and front main crank seal is under there. on the four, the water pump is not.
possible extra parts cost might you encounter?
springs and tensioner(s) for the belt. accessory belt replacement, leaking front main cover (which includes the oil pump, crank, and front pan seals/gaskets).
however,
the water pump (mounted and driven by the accessory belts, not under the t-cover) is accessable at this time and should be inspected along with the hose to it. if you spring a leak later on the pump or hose, you willl wish you had.
cheers!
|